notice

This is documentation for Rasa X Documentation v0.32.x, which is no longer actively maintained.
For up-to-date documentation, see the latest version (0.34.x).

Version: 0.32.x

Helm Chart Installation

This page contains detailed instructions for installing Rasa X in a scalable cluster environment using OpenShift or Kubernetes (K8S).

Rasa X is available as a Helm Chart for a cluster setup. If you are not using Helm in your cluster, you can still use the following instructions to generate the Kubernetes or OpenShift object configurations via the Helm command-line interface, and install those configurations manually.

note

The Rasa X Helm chart is open-source and available in the rasa-x-helm repository. Please create an issue in this repository if you discover bugs or have suggestions for improvements.

Requirements

Note: Rasa X is intended to be installed on a server and not to a personal/local machine. Installing on a server is recommended because Rasa X is designed to stay up continuously, and not to be frequently stopped or restarted.

Cluster Requirements

To install the Rasa X Helm chart, you need an existing Kubernetes cluster or OpenShift cluster. Setting up a Kubernetes / OpenShift cluster can be tedious, hence we recommend to get a managed cluster from a cloud provider like Google Cloud, DigitalOcean, Microsoft Azure, or Amazon EKS.

The requirements of the single pods can vary, especially those of the rasa-production and rasa-worker pods, dependent on the model size and what pipeline is used and the number of users. We recommend providing at least the following resources:

DeploymentCPUMemory
rasa-x11 GiB
event-service21 GiB
rasa-production22 GiB
rasa-worker44 GiB
nginx0.2200 MiB
app0.5200 MiB
duckling0.5200 MiB
postgresql1250 MiB
rabbit0.2250 MiB
redis0.2250 MiB

We recommend a size of 10 GiB for the Rasa X volume claim and at least 30 GiB for the database volume claim.

Installation Requirements

  1. Please check that you installed the Kubernetes or OpenShift command line interface (CLI). You can check this using the following command:

    ```bash
    kubectl version --short --client
    # The output should be similar to this
    # Client Version: v1.16.3
    ```

    If this command resulted in an error, please install the Kubernetes CLI or the OpenShift CLI depending on the cluster you’re using.

  2. Make sure that the Kubernetes / OpenShift CLI is correctly connected to your cluster. You can do so by using the following commands:

    ```bash
    kubectl version --short
    # The output should be similar to this
    # Client Version: v1.16.3
    # Server Version: v1.14.8-gke.12
    ```

    If you get an error when executing the command, you are not connected to your cluster. To get the command to connect to the cluster please consult your cluster’s admin or the documentation of your cloud provider.

    If you are using K3s for an embedded Kubernetes installation, please make sure that you exported the path to the Kubernetes config:

    export KUBECONFIG=/etc/rancher/k3s/k3s.yaml
  3. Please make sure you have the Helm CLI installed. To check this, run:

    helm version --short
    # The output should be similar to this
    # v3.0.0+ge29ce2a

    If this command leads to an error, please install the Helm CLI.

    In case you are using a version <3 of Helm, please update to Helm version 3.

Supported Browsers

The web interface aims to support browsers that meet the following criteria:

  • 0.2% market share

  • not Internet Explorer

  • not Opera Mini

Installation

note

If you’re installing Rasa Enterprise, please follow the Rasa Enterprise instructions where given. If a step does not have separate instructions, the step applies to both Rasa X and Rasa Enterprise.

1. Create Namespace

We recommend installing Rasa X in a separate namespace to avoid interfering with existing cluster deployments. To create a new namespace run the following command:

```bash
kubectl create namespace <your namespace>
```

2. Create Values File

Prepare an empty file called values.yml which will include all your custom configuration for the installation with Helm.

3. Configure Credentials

To configure the credentials, copy the section below into the values.yml file and replace each <safe credential> marker with a different alphanumeric string. Please use safe credentials to avoid data breaches.

```yaml
# rasax specific settings
rasax:
# initialUser is the user which is created upon the initial start of Rasa X
initialUser:
# password for the Rasa X user
password: "<safe credential>"
# passwordSalt Rasa X uses to salt the user passwords
passwordSalt: "<safe credential>"
# token Rasa X accepts as authentication token from other Rasa services
token: "<safe credential>"
# jwtSecret which is used to sign the jwtTokens of the users
jwtSecret: "<safe credential>"
# rasa: Settings common for all Rasa containers
rasa:
# token Rasa accepts as authentication token from other Rasa services
token: "<safe credential>"
# RabbitMQ specific settings
rabbitmq:
# rabbitmq settings of the subchart
rabbitmq:
# password which is used for the authentication
password: "<safe credential>"
# global settings of the used subcharts
global:
# postgresql: global settings of the postgresql subchart
postgresql:
# postgresqlPassword is the password which is used when the postgresqlUsername equals "postgres"
postgresqlPassword: "<safe credential>"
# redis: global settings of the postgresql subchart
redis:
# password to use in case there no external secret was provided
password: "<safe credential>"
```

4. Specify Rasa X and Rasa Open Source Versions

We recommend using the latest Rasa X version (0.32.2) and the latest Rasa Open Source version (1.10.12).

# rasax specific settings
rasax:
# Rasa X configuration you did in previous steps
# ...
tag: "0.32.2"
# rasa: Settings common for all Rasa containers
rasa:
# Rasa Open Source configuration you did in previous steps
# ...
# tag refers to the Rasa image tag
tag: "1.10.12-full"

5. Configure Rasa X Image

There’s nothing you need to do for this section.

6. Optional: Configure Custom Action Server

See these instructions to configure a custom action server.

note

If you are following the Using Helm to Generate Object Configurations guide, stop here and continue with the latter.

7. Deploy Rasa X

Run the following commands:

# Add the repository which contains the Rasa X Helm chart
helm repo add rasa-x https://rasahq.github.io/rasa-x-helm
# Deploy Rasa X
helm install \
--generate-name \
--namespace <your namespace> \
--values values.yml \
rasa-x/rasa-x
note

OpenShift only: If the deployment fails and oc get events returns 1001 is not an allowed group spec.containers[0].securityContext.securityContext.runAsUser, re-run the installation command with an added --set securityContext.fsGroup="" flag.

Then wait until the deployment is ready. If you want to check on its status, the following command will block until the Rasa X deployment is ready:

```bash
kubectl --namespace <your namespace> \
wait \
--for=condition=available \
--timeout=20m \
--selector app.kubernetes.io/component=rasa-x \
deployment
```

Alternatively you can also monitor the pods directly. Note that the deployment process can involve containers restarting until everything is ready (e.g. if the database container is not ready yet).

8. Access Rasa X

By default the Rasa X deployment is exposed via the nginx service. You can get the IP address using this command:

```bash
kubectl --namespace <your namespace> \
get service \
-l app.kubernetes.io/component=nginx \
-o jsonpath="{.items..status..loadBalancer..ingress[0].ip}"
```

You can then access the deployment on http://<ip>:8000

:::note
Depending on the used cluster / cloud provider this might not work. Please refer
to the cloud provider’s documentation / administrator what the recommended way
for exposing the `nginx` service is. We are also happy to help you with any
issues in the [Rasa Forum](https://forum.rasa.com/).
:::
Go to Next Steps## Reference

Accessing Secrets

This section describes how to retrieve secrets from your running deployment. You have the option to retrieve the following secrets:

descriptiondefault secret name
PostgreSQL database passwordpostgresql
Redis lock store passwordredis
RabbitMQ event broker passwordrabbit

Run the following command, replacing <secret name> with one of the values in the table, and <your namespace> and <your release name> with your namespace and the name of your release:

```bash
secret=<secret name>
namespace=<your namespace>
release_name=<your release name>
kubectl --namespace ${namespace} \
get secret ${release_name}-${secret} -o yaml | \
awk -F ': ' '/password/{print $2}' | base64 -d
```
note

If you’re not sure what namespace or release name your deployment runs under, you can use the following commands to find out. To list the available namespaces, run:

kubectl get namespaces

And to list the releases under a particular namespace namespace, run:

helm list --namespace <your namespace>

Accessing Logs

This section describes how to get logs from the running containers.

  1. Get the name of the pod which you want to get the logs of.

    ```bash
    kubectl --namespace <your namespace> \
    get pods
    # The output should be similar to this
    # NAME READY STATUS RESTARTS AGE
    # rasa-app-58d476497-ktkqn 1/1 Running 0 45m
    # rasa-duckling-7696b7f474-km6dx 1/1 Running 0 45m
    # rasa-event-service-7657b6b489-96drn 1/1 Running 1 45m
    # rasa-nginx-64b6b464f6-p9bmb 1/1 Running 0 45m
    # rasa-postgresql-0 1/1 Running 0 45m
    # rasa-rabbit-0 1/1 Running 0 45m
    # rasa-rasa-production-c86fbf7f7-q9pp5 1/1 Running 0 45m
    # rasa-rasa-worker-5d49485976-6z2kj 1/1 Running 0 45m
    # rasa-rasa-x-5788cddbb7-5zf86 1/1 Running 0 45m
    # rasa-redis-master-0 1/1 Running 0 45m
    ```

    rasa-rasa-x-5788cddbb7-5zf86 is for example the name of the Rasa X container.

  2. To get the logs of the container run:

    ```bash
    kubectl --namespace <your namespace> \
    logs <name of the pod>
    ```

Using Helm to Generate Object Configurations

If you don’t want or cannot use Helm to install Rasa X in your cluster, you can still use Helm to generate the Kubernetes / OpenShift resource files.

  1. Follow the installation instructions until the deployment part.

  2. Run the following command to generate the Kubernetes / OpenShift resource files and write them in a file rasa-x-deployment.yml:

    ```bash
    helm repo add rasa-x https://rasahq.github.io/rasa-x-helm
    helm repo update
    helm template \
    --namespace <your namespace> \
    --values values.yml \
    <your release name> \
    rasa-x/rasa-x > rasa-x-deployment.yml
    ```
  3. You can then deploy these manually by running:

    ```bash
    kubectl --namespace <your namespace> \
    create -f rasa-x-deployment.yml
    ```

Next Steps